Regular maintenance of plush carpets can make them look as good as new again, but achieving that is not an easy task. DIY carpet cleaning may save you some dollars, but when you get it wrong, you will wish that you would have hired a professional service instead. This makes sense when you are at the end of your lease.
In such a situation, you should hire professionals for a quality end of lease cleaning in Melbourne instead of sprucing up the rental property on your own. They have the experience, proper tools, standard cleaning checklist and apt knowledge to carry out the job with perfection.
However, if you are trying to clean your carpets on your own, then have a look at the following costly mistakes that you should avoid. Always remember that ignoring right cleaning methods can lead to expensive damage, so keep these blunders in mind and try to avoid them.
Let’s get started!
1. Rubbing or Scrubbing the Carpet Stain
Are you also rubbing the carpet stain hard to get rid of it? If yes, then you are only damaging the fibres of your delicate floor covering. There is a major misconception that scrubbing or rubbing can remove the tough carpet stain.
This could make the spot worse. Aggressive attempts push the molecules of the dried stain further deep into the carpet and destroy its looking.
So, make sure you avoid this carpet cleaning mistake whenever you want to treat spills, splatters, or dried stain. Instead, blot the surface using a clean microfiber cloth or a paper towel. You can use white vinegar, mild dishwashing liquid and warm water solution to break down the stain and make your job a bit easier.
If your carpet has moulds or mildew, then hire a reliable carpet steam cleaning service in Melbourne for a sparkling result.
2. Over-Saturating the Surface
Most people use a lot of solvent solution or foamy detergent to remove stubborn stains and nasty marks from the carpet. This is a huge carpet cleaning mistake because it can damage the fibres if liquid embeds deep into the pads. A saturated floor covering can discolour, shrink or collect more dust, dirt and pollens- causing serious damage.
Instead of applying the solvent solution directly on the surface, damp the microfiber cloth, get rid of excess liquid and apply it on the affected area. This is the right method when it comes to lifting carpet stains, mould and mildew.
3. Not Vacuuming Properly
There is no denying the fact that vacuuming can help you get rid of accumulated dust, dirt particles, pet hair, pollens and other debris embedded deep inside the fibres of a carpet.
However, most, people overlook this aspect and don’t vacuum enough. Instead of waiting too long to let the dust collect, you should vacuum your carpet at least twice a week for better outcomes.
If you have small kids or pets at home, then vacuuming thrice per week is a good idea to keep your carpet look as good as new. Make sure you run the machine in the right direction to fetch the tiny dust particles and granules.
For those who are at the end of a tenancy can contact an experienced company for a thorough end of lease cleaning in Melbourne. They will clean every nook and corner of the property, including carpet vacuuming to help you pass the final inspection.
4. Applying the Wrong Carpet Cleaner
Not all carpet cleaning products are the same. They are produced using a variety of elements, especially harmful chemicals. If you want your carpets to stay intact for years, then prefer natural cleaning products over store-bought cleaners.
Depending on the type of your carpet, choose the cleaning agent to get the most out of it. For example, if you use a diluted detergent solution for polyester, you could damage your carpets. This is a costly carpet cleaning mistake.
So, before applying any solution on the affected area, make sure you read the label and always follow the instructions of a manufacturer to avoid blunders.
Tip: One of the best solutions is white vinegar and warm water. It is a natural carpet cleaner and works wonders in breaking down tough stains without harming the surface.
5. Use Inappropriate Deodoriser
Carpets not only accumulate dust and dirt but also linger nasty smell that should be removed as soon as possible. However, most people make a mistake of using incorrect or low quality of deodoriser that often result in build-up gunk and residues deep inside your carpet’s fibres. While powdered deodoriser collects residues, sprays can leave a sticky mark that will collect dirt and dust.
Instead of using store-bought deodoriser, you can apply a generous amount of baking soda and leave it for a few minutes before vacuuming. Apart from this, you can try the hot water extraction method by hiring professionals to avoid mistakes.
6. Not Doing A Spot Test
Finding a suitable carpet cleaning agent doesn’t mean you overlook a spot test. This is one of the best mistakes people do and end up ruining their beautiful carpet.
It is always good to apply the cleaner on a tiny or hidden area of your carpet to check whether it is working or not. If there is no discolouration, then you can apply it on your entire carpet without a hint of stress.
These are 6 costly mistakes that you need to avoid while cleaning your plush carpet and rugs at home. If you are preparing your rental property for the final inspection, then avoid doing it yourself and consider hiring professionals for the best end of lease cleaning in Melbourne. With their assistance, you can impress your landlord and pass the inspection with ease.