Since carpets are covered with dust, dirt, pet hairs, food spills, splatters and stains, it is important to clean them on a regular basis. Frequent vacuuming is a great way to bring back the lost shine of your carpets. But, most people damage the fibres by scrubbing off the carpet stains or using harsh chemicals.
It is good to have proper knowledge before getting into the carpet cleaning process. Therefore, many tenants consider hiring professionals who can carry out the best end of lease cleaning in Melbourne. They are well-versed with tried and tested cleaning methods for almost everything, including your delicate floor coverings.
You should avail professional service if you are at the end of your tenancy. But if you are looking for some DIY carpet cleaning tips for regular maintenance, have a look at this article. Here are 7 best cleaning hacks that can save your carpet from damage while enhancing its glory.
1. Use a Squeegee to Remove Pet Hair
Pet hair embedded deep inside the fibres of a carpet need to be removed very carefully. You can’t get rid of it using a vacuum cleaner. If your carpet has short hairs, it is good to use a squeegee.
Of course, this tool is ideal for cleaning window glass, but you can use it to get rid of gunk, loose debris, pet hair, dead skin and other substances that form thin layers and embed to the surface.
Tip: Water the tool and use it to remove pet hair and other loose dirt. This won’t damage the fabric of your delicate floor coverings.
2. Blot the Carpet Stain
Nothing can be more heartbreaking than seeing someone accidentally spilling red wine on your off-white carpet. It is important to treat the spill immediately. If it soaks into the fibres of your carpet, it can be tough to drive out.
Most people make a mistake of rubbing the spill or stain, which can further damage the carpet’s fabric. If you want to sustain the beauty of your carpets for years, then blot the stain rather than rubbing.
Take clean microfiber cloth or a paper towel and blot the affected surface gently. Begin from the corners and may your way towards the centre. It is good to use white vinegar and hot water solution on tough stains. Leave it for 10 minutes before blotting. The purpose is to let the liquid out of the carpet.
3. Hot Iron Strategy for Stubborn Stains
A lot of elbow grease is required when it comes to removing the dried stain from a soft and delicate carpet. Fortunately, there is a great solution. You can make the use of hot iron to get rid of dry stains. Here is a quick guide that will make it super easy for you to get the job done without any confusion:
- Vacuum your carpet thoroughly to gather loose dirt, dust, grime and other debris.
- Soak a microfiber cloth in a homemade solution (vinegar and water).
- Apply the cloth to the stain and let it sit for 5 minutes. The vinegar will break down the stain.
- Put the hot iron on the damp cloth. Gently press it in a circular motion.
- This will transfer the stain from the carpet onto the cloth.
If your carpets are extremely dirty, you need to hire carpet cleaners for steam cleaning in Melbourne. They will bring back the lost glory of your beautiful and expensive floor coverings without any discolouration or damage.
4. Prepare A Natural Carpet Cleaner
There is no denying the fact that store-bought carpet cleaning products are great for deep cleaning dirty carpets. They work wonderfully in removing tough stains of ink, wine, coffee, pet urine, etc.
But, most of them contain harmful chemicals that can destroy the fibres of your soft floor coverings. If you want to keep your carpets healthy and beautiful for years, ditch these hazardous cleaning products.
You can prepare homemade carpet cleaners that are more organic and environmentally-friendly. All you need to do is to mix 2/3 cup of Hydrogen Peroxide, a half cup of white vinegar, 2 tablespoons of dish soap, 2 tablespoons of fabric softener, a few drops of essential oil, and one gallon of hot water.
You can load this in a shampooing machine and deep clean your carpets at home without even causing any damage.
5. Get Rid of Oil Stains
Oil stains on a light-coloured carpet look extremely bad. It needs to be treated as soon as possible. You can use baking soda to absorb unpleasant odours and liquids from the carpet along with the oil stain.
Sprinkle a generous amount of baking soda on the affected area. Leave it for 10 minutes. The powder will create a dry crust once it is full. This will make it super easy for you to vacuum it.
After removing the residues of baking soda, use a cloth to dab the rest of the stain. Make sure you gently dab the surface because such stains can easily embed deep inside the fibres of your carpet.
6. Rubbing Alcohol Combats Nail Polish Stains
Acetone is commonly used to remove nail polish from our fingernails. But, it won’t remove it from your carpets. You need a better option for this.
Let the nail polish dry completely on the carpet. Now, use a butter knife to scrape off the dry stain. Do this carefully because it could damage your carpet. It is good to scrape off with soft hands.
After that, apply a small amount of rubbing alcohol to the microfiber cloth and dab the stain. Do this until the stain dissolves. The cloth will absorb the excess nail polish.
7. Get Rid of Bad Odours Using Borax and Baking Soda
Combine borax with two cups of baking soda and a few drops of your favourite essential oil. This powder is perfect for eliminating bad smells from your delicate carpet and area rugs. Borax is used to kill germs and bacteria that might be lurking in your carpet and causing the smell.
Apply the solution and let it sit for 10 to 24 hours and then vacuum it to remove the residues of the powder.
Thorough cleaning of carpets is not as tough as it seems. All you need is proper guidance and necessary tools and products. You can also hire certified experts for a thorough end of lease cleaning in Melbourne for the quick and stress-free return of your bond money.