8 Things In Your Rental Property That You Forget To Clean

Are you planning to relocate to Melbourne, Australia and want to ensure you get your rental bond back before leaving? Your rental bond generally equals one month’s rent in Victoria and can only be higher than this when your rent is more than $900.  To ensure you get this bond amount back in full, you must follow certain criteria, including paying your rent on time, doing any repair work and maintaining your property.

If you are cleaning your home by yourself, it is common to miss certain spots in your rental property. Therefore, you should follow the checklist below to ensure that you do not forget these eight things when cleaning your rental property and can get your bond back. 

You can also always hire end of lease cleaners in Melbourne to help you spruce up your home before your landlord comes to inspect it. Whether you clean your home by yourself or with professional cleaners, here are some areas you must not forget while cleaning:

1. Wipe Down Your Refrigerator

Did you know that your refrigerator handle contains around 26% of germs? This is because this is a high-touch area that must be cleaned thoroughly to prevent any infectious diseases like the Coronavirus (COVID-19) pandemic. In order to clean your fridge and its handles thoroughly while doing an end-of-lease cleaning, you should follow the below steps:

2. Dust Your Ceiling Fans

Another part of your home that is difficult to reach and often needs to be addressed at the end of the tenancy is your ceiling fans. But it is important to clean them as the blades are filled with dust and dirt, which can look very bad during an inspection and cause allergies for new tenants.

To clean your ceiling fans, end of lease cleaners in Melbourne recommend using a step ladder or stool and then taking a pillowcase and moving it along each fan blade. This will collect all the dust; you can shake it all out outside and wash the pillowcase. Besides ceiling fans, here are some tips on how to clean other hard-to-reach places in your home that you must clean before an inspection.

Important Tip

Ensure you wear gloves and a mask while cleaning your fans to avoid inhaling dust and dirt.

3. Scrub Your Walls

You don’t have to paint over these areas if your walls are full of greasy fingerprints and smudges. You can take some baking soda and spray these smudges and stains for 15 minutes. Next, take a microfiber sponge slowly away all these marks and dry it with a clean cloth. You can also use a magic eraser to wipe down your walls thoroughly and make them look brand new.

4. Vacuum Your Baseboards

Professional end of lease cleaners in Melbourne state that you must clean your baseboard when moving homes as these areas can collect dust, dirt and debris over time. To clean your baseboards, use a handheld vacuum with a HEPA filter to trap even the tiniest dirt particles. You can then wipe down these baseboards with a damp cloth and scrub any stains with white vinegar. Dry the areas with a clean cloth to prevent mould infestations in your home.

5. Remove Gunk From Your Microwave

Your microwave door contains about 48% germs as it is a high-touch area; thus, you must make sure you use wet wipes to clean the handles frequently. You should also clean the insides of your microwave before leaving your old home so that it is free of germs and foul odour. To do this, you should:

Similar to your microwave, your oven might also have food bits stuck to its sides and greasy spots all over. In order to remove these stains and spots before your landlord comes to inspect your home, you should follow these simple oven cleaning tips.

6. Get Rid of Tile Grout

To clean tile grout so that your floors are sparkling and shining before your landlord’s inspection, you should spray the areas with baking soda and hydrogen peroxide. Leave this mixture for 20 minutes, and then use a soft-bristled toothbrush to scrub the area and wipe away the grout. Next, rinse and clean the area with a dry cloth so that your floor tiles look new and shiny.

Tip

You can also use this baking soda to make your shower doors sparkle so that it is free of soap scum and hard water stains before your landlord comes to inspect your home.

7. Polish Your Faucet Handles

If your faucets have become dirty and stained with mineral deposits over time, you need to clean them immediately. To clean your bathroom and kitchen faucets, end of lease cleaning services in Melbourne recommend you do first mix half a lemon with ½ cup of baking soda and mix it well.

Next, apply this paste with a microfiber sponge on your faucets and leave it for 15 minutes. Lastly, use a microfiber cloth to wipe down these faucets and remove the solution.

8. Disinfect The Area Behind Your Toilet

Lastly, even if you have scrubbed and cleaned your bathroom floors, shower area, sink, and toilet bowl completely, you might have neglected one area. This area is behind your toilet, is hard to clean and reach and thus needs to be noticed.

You can clean this area by using gloves and a mask and placing wet towels soaked in white vinegar in this region. Leave this for twenty minutes so the vinegar can soak up all the dirt and mould, and then wipe the area with a microfiber cloth and let it dry.

Besides these areas, if you want to make sure that you have covered all parts of your home for an end-of-lease cleaning, you should follow this short and simple cleaning checklist in Melbourne.

Conclusion

Once you complete your cleaning checklist by scrubbing all these areas and other parts of your home, you will be able to pass your landlord’s inspection and get your bond back. If any hard-to-reach spots in your home are particularly dirt-ridden, you should hire professionals in Melbourne to clean these spots.

These experts will use the most advanced and eco-friendly tools to ensure every corner of your home is spotless to help you regain your bond.