A range hood plays a vital role in maintaining good air quality in your home. It fetches odours up and away from your stovetop and throws them outside the property. The filter of your range hood keeps indoor air safe and dust-free. With this tool, you can easily tackle grease, grime, dirt and bad odours while preparing meals for your family.
Without this appliance, debris and dirt could get accumulated in the ductwork, leading to a fire hazard. That’s why it is good to have a range hood with a clean and dirt-free filter.
Consistent cleaning is imperative for various reasons, including the longer life of the bowler, enhanced power efficiency, removal of grease and smoke, quality indoor air, easier cleaning, clean walls, and utmost safety.
If you are at the end of your tenancy and concerned about your bond money, prefer hiring licensed professionals for the
best end of lease cleaning in Melbourne. They will clean everything, including your kitchen, range hood, filters and other areas, with perfection.
For DIY cleaning of your range hood filters, consider the following steps and achieve the best possible outcomes.
Step 1: Gather Cleaning Supplies
Before you spruce up your range hood filter, make sure you arrange all the necessary cleaning supplies. This will save you time and energy while removing dust and grime from the filter. All you need is:
- Dish soap
- Boiling water
- White Vinegar
- Baking soda
- Non-abrasive scrubber
- Microfiber cloths
- Paper towels
Avoid using store-bought cleaning products if you want to
keep the environment safe and healthy.
Step 2: Remove Filters from your Range Hood
First, search for the filter on your range hood and remove it quickly. On most range hoods, the filter is located on the underside of the appliance, and it might have handles on the sides so that you can easily pull it out. Some range hood filters have a pinching technique that slides out when you squeeze it.
You can also read the manual book to know how to remove the filter properly. Make sure you safely take it to the sink/ bucket.
Step 3: Fill the Sink or Bucket with Boiling Water
Removing built-up grease, grime and gunk from a range hood filter require a bit of elbow grease. You can use boiling water in the sink. Be careful while pouring it.
If your sink is not big enough for submerging the removable parts of the range hood, get a large container. Make sure the container is heat resistance, especially when using a plastic one otherwise it can melt and even cause you harm.
Pro-tip: Wait for the water to cool down before unplugging the sink or picking the container to dump the unclean water.
Step 4: Prepare the Cleaning Solution
The next step is to pour two tablespoons of dish soap and ¼ cup of baking soda into the boiling water. Mix it using a brush until the water turns soapy. You can also use white vinegar instead of baking soda. This solution will help you remove tough grime, grease, tough stains and bad smell from the filter with ease.
You can use the same cleaning solution to
clean your oven and make it look new. Both baking soda and white vinegar are excellent degreasers and sanitisers that can clean almost any surface or object without toxin. What’s more they are economical and readily available, making them the perfect cleaning agents.
Step 5: Soak Your Filters in the Solution
It is good to soak your greasy filters in soapy water for a couple of hours. Make sure you soak them longer if you don’t want to do abrasive scrubbing. Be careful while putting aluminium filters into the solution. Whether you have a steel, aluminium or charcoal filter, be sure you check the manual before getting into the process.
If you don’t have skills or enough time for cleaning, hire professional end of lease cleaners in Melbourne and secure your bond money. They will clean the entire premises from top to bottom, including your air vent filters and fans.
Step 6: Scrub Them Properly
So, in this step, you need to scrub the filters to get rid of built-up grease, tough stains, grime, gunk and other spots. Make sure you use a non-abrasive scrub brush for quick and effective results. Spray white vinegar and warm water solution on affected areas and scrub it off properly. Brush every nook and cranny to get rid of stuck dirt or grime.
Step 7: Rinse and Dry
Do not forget to rinse the filters properly in hot water, and it will remove the soap residue with ease. You can also use normal water for thorough rinsing.
Also, dry it using a clean microfiber cloth or paper towel. This is an important step if you want to achieve spotlessly clean range hood filters.
Step 8: Replace the Filters
Put the clean filters back into the range hood. You can re-read the manual if you are facing any issues.
Clean your range hood filters once a month to keep them running smoothly and efficiently. Also, do not use chemically-laden products as it can pollute the indoor air and cause harm to the environment as well.
Conclusion
Without proper cleaning, the range hood filter can get clogged with grime and grease and pollute the
indoor air. To get the best out of your range hood, make sure you deep clean the filter regularly with the help of the cleaning guide mentioned above in the article. If you are moving out of a rented property, hire certified experts to clean a detailed end of lease cleaning in Melbourne and impress your landlord.
