A Guide To Removing Limescale From A Toilet

Women cleaning toilet

A Guide To Removing Limescale From A Toilet

By : angila

Limescale on toilets is a common sight in bathrooms, as household water has metal and mineral deposits even after purification. Depending on the quality and salinity of water in your area, limescale stains on your toilet can vary from light to severe.

You should routinely clean and disinfect the toilet to prevent accumulation of the calcium deposits as they threaten the fixture’s structural integrity and cause obstruction & oxidation of the drain pipes.

It is a serious issue when ending a tenancy, as tenants can lose their bond money if the toilet is dirty and stained on the final day of inspection.

Hiring experienced cleaners who offer the best end of lease cleaning in Melbourne is a good decision because they have quality products and use the right techniques to remove tough stains & messes from residential properties. Hence, they can clean bathroom surfaces and fixtures effectively and efficiently besides other areas in your rental property.

In addition, follow the tips shared in the guide below for removing limescale from a toilet during regular house cleaning.

Things To Do Before Cleaning

You need to gather necessary cleaning supplies and prep the fixture to remove limescale stains, and manage the process efficiently. Thus, take the following steps before cleaning the toilet.

  • Get cleaning vinegar, muriatic acid, oxalic acid, extra-strength magic eraser, and the cleaner you prefer for removing limescale from toilets.
  • Turn off the water supply for the water & drain the bowl before applying or pouring any cleaner.
  • Keep brushes, sponges and scouring pads of different sizes on hand. Get ones with bendable heads, rubber grips, and adjustable handles.

Clean Mild Stains With White Vinegar

If the toilet has faded streaks and rings of calcium deposits, treat them with white vinegar. Since limescale is basic in nature, the acetic acid in vinegar works excellently in breaking and removing it.

Keep the vinegar undiluted and keep pouring and spraying it on the toilet repeatedly to ensure the stains remain saturated for at least 3-4 hours. Afterwards, scrub the stains with a firm brush and use a mild soap and warm to wash the residues.

White vinegar is a versatile natural cleaner that can sanitise almost any household surface or fixture. Therefore, it is among the eco-friendly cleaning products professional end of lease cleaners in Melbourne use for sanitising and cleaning homes.

Remove Limescale With Oxalic Acid

Oxalic Acid is an organic compound effective against tough stains like rust, grime and mineral deposits. You can apply the powder on a damp brush or douse the tool with liquid oxalic acid to scrub the limescale from the toilet. If the stains are stubborn, let the cleaner dwell for a few hours before scrubbing and washing with water.

Since oxalic acid is organic, it doesn’t produce toxic fumes like ammonia and bleach. It won’t pollute your home’s indoor air with volatile organic compounds (VOCs) and ensure the toilet is clean.

Scrub Away Difficult Deposits

Even after cleaning mineral stains on toilets with potent cleaners, some spots are hard to remove. You can use a heavy-duty scrubber like a magic eraser, sandpaper, or pumice stone to get rid of them.

However, be gentle and cautious while using these tools because they can permanently scar and damage the toilet surface. Make sure to dampen the cleaner before scrubbing to avoid unnecessary friction that causes swirls, scratches or discolouration.

If you have never used these tools for removing limescale or other mineral deposits from toilets, test them on an inconspicuous spot to know the results. It is a professional technique end of lease cleaners in Melbourne use to avoid mishaps while cleaning.

Use Muriatic Acid Carefully

Muriatic acid is a professional-grade cleaner consisting of hydrochloric acid, making it risky to use without personal protective equipment. To remove limescale and other deposits heavily soiling your toilet, use this cleaner only when you know the correct methods for storing, applying and washing it.

Professional end of lease cleaners in Melbourne are experienced and trained. Thus, they can use such cleaners without injuring themselves or damaging the fixtures.

While cleaning your toilet with muriatic acid, wear gloves, goggles and a mask to protect from its toxic fumes. Apply the cleaner to the bowl and let it dwell for the time mentioned on the label. Follow the usage instructions carefully, and don’t leave the cleaner for longer than necessary.

The results are worth the effort, but if you are not confident about using such cleaners, don’t hesitate to seek the assistance of professionals.

The Bottom Line

Keeping your toilet limescale-free is only possible with routine bathroom cleaning and removal of deposits in the initial stage. Thus, follow the tips shared above to clean the toilet regularly and get rid of mineral deposits without hassle.

However, when ending a tenancy, hire professional end of lease cleaners in Melbourne to deep clean your bathroom surfaces/fixtures and other areas of the rental property to make it pristine for the final inspection.