DIY Tips to Clean Bathtub Stains

DIY Tips to Clean Bathtub Stains

By : angila
Do you love soaking in your bathtub to unwind and detox at the end of the day? This is an excellent way to relax, but when you haven’t cleaned your bathtub in a while, it could lead to stains, mould, and mildew all over your tub. According to bond cleaning experts in Melbourne, cleaning your bathtub every week and doing a deep cleaning every month is essential. This will help you to get rid of hard water, rust stains, soap scum and limescale and keep your bathtub clean and hygienic. But there are different DIY methods and products that you should use to clean tough stains from a bathtub. You should first take a look at the different kinds of bathtub stains:

Types Of Bathtub Stains

  • Soap scum: Hard water is formed when rocks and soil mix with groundwater. This hard water mixed with soap leads to white films and soap scum that sticks to your bathtub. These are easy to remove but must be cleaned regularly because if these stains are left unattended, they can attract mould and mildew.
  • Limescale: Limescale is another hard water stain formed due to the combination of heat and hard water. This results in a powdery white residue that must be cleaned immediately, or it can clog your bathtub drain.
  • Rust: Rust stains are reddish-brown stains formed due to the combination of iron bacteria and minerals in hard water. This can cling to the bathtub surface and wear it out over time.
  • Yellow stains: Yellow stains are caused by oils secreted by our bodies after a bath. They stick to the bathtub and lead to discolouration and a yellow residue.

  • You can clean hard water stains like limescale and soap scum using the same products and methods. But rust stains must be treated differently so that you don’t end up causing more damage. Yellow stains are the easiest to clean and can be wiped off after a bath with water. If the yellow stains have been there for a while, spray white vinegar for ten minutes and then wipe the stains off. Now that you know the various bathtub stains, you should see how to remove them from different bathtubs:

    Cleaning Hard Water Stains From An Acrylic Bathtub

    Hard water stains like limescale and soap scum can stick to the bottom of an acrylic tub and must be removed regularly. You need white vinegar, water, towels, baking soda and a microfiber sponge to clean the stains in the following steps:
  • Bond cleaning experts in Melbourne suggest that you firstly pour white vinegar into a bowl and then dip towels in it.
  • Spread these paper towels over the hard water stains and let the vinegar soak on the stains for 20 minutes.
  • Using white vinegar is useful because the acetic acid in it will dissolve and loosen the stains, and you can then take a microfiber sponge and scrub it off.
  • However, if the stain is old or deeply embedded in the bathtub, just vinegar won’t do, and you should also use some baking soda.
  • Once you have let the vinegar soak into the stains, pour ⅓ cup of baking soda and warm water over the stains.
  • Combining basic baking soda and acidic vinegar will create carbon dioxide gas that will lift and remove even the toughest stains.
  • You should then use a microfiber sponge to scrub off the stains effortlessly.
  • Remember to rinse your tub with water to remove the solution and then wipe it dry with a cloth.

  • Cleaning Rust Stains Off An Acrylic Bathtub

    To remove rust stains from your acrylic bathtub, you should use baking soda, lemon juice, a microfiber sponge and water in the following ways:
  • Firstly, start by rinsing the tub with hot water and then sprinkling generous amounts of baking soda over the stains.
  • Let the baking soda sit for ten minutes, then wipe it off with a microfiber sponge.
  • If the rust stains are still visible, you should cut a lemon in half and pour the juice over the stain.
  • Leave the juice on for thirty minutes, and the citric acid in the lemon juice should dissolve the rust so you can scrub it off quickly.
  • You should then rinse the tub and repeat if needed.

  • Cleaning Hard Water Stains From A Porcelain Bathtub

    Porcelain bathtubs are easy to maintain, but you should get a deep cleaning done by bond cleaners in Melbourne once a month at least to prevent any infectious diseases. If you have hard water stains on your porcelain bathtub, you can remove these easily with white vinegar, water, a magic eraser and a toothbrush in the following steps:
  • First, spray the stains with half a cup of water mixed with half a cup of vinegar.
  • Leave this solution for twenty minutes and then repeat the process to eliminate all the hard stains.
  • If the stains are too hard to scrub, use a magic eraser to remove them.
  • You should also use a toothbrush to scrub hard water stains near the drain and in the small nooks and corners of your bathtubs.
  • Finish by rinsing the bathtub with hot water.

  • Cleaning Rust Stains From Porcelain Bathtubs

    Cleaning experts who offer reliable end of lease cleaning in Melbourne recommend that you use salt and lemon to clean rust stains from your porcelain bathtub in the following ways:
  • Start by spraying lemon juice on the rust stains and then sprinkle salt over it.
  • Let the salt combine with the lemon juice and leave it overnight.
  • You should then use a microfiber sponge to scrub the mixture and rinse it with hot water.
  • Repeat the process if needed, and remember to clean the bathtub with hot water once you are done.

  • Conclusion

    There are many ways to clean bathtub stains, as seen above. But it is essential to do this regularly so that your bathtub can be clean and glistening and you can enjoy a nice, hot soak.