How To Clean A Rental Property After A Renovation

How To Clean A Rental Property After A Renovation

By : angila
Tenants in Victoria have the right to live in a clean, well-maintained and habitable rental property. Thus, inspecting the premises thoroughly before signing the lease agreement and an initial condition report is imperative. According to the Residential Tenancies Act in Victoria, it is the standard responsibility of landlords to keep the property clean and sanitised at the beginning of the tenancy. This is crucial to maintain a harmonious tenant-landlord relationship throughout the lease. However, suppose you have carried out renovations after your landlord’s consent. In that case, you must clean a rental property to bring it back to a presentable living condition, especially during the end of your tenancy. Look at some pro cleaning tips to help you tackle dust, paint stains, and unpleasant odours post-renovation. It is good to follow the proper guide and return a rental property in a clean state for a hassle-free retrieval of the bond amount. Let’s Get Started!

Sweep Your Floors First

You should always start by sweeping your floors to get rid of wood chips, loose debris, nails, screws and other sharp objects. This will allow you to clean other surfaces without the risk of any injury. Plus, Sweeping causes dust particles to spread and settle on surfaces like couches, shelves and other furnishings. This means if you have already cleaned these areas, they will get dirty again- waste your precious time and energy.

Dust From Top to Bottom

Whether it is a major renovation project or minor repair work, it always leaves dust particles, wood dust, stone and brick debris, etc. Use tools like a microfiber cloth duster and an extendable handle to clean your rental property from top to bottom. Start from your ceiling fans, walls, shelves, frames, cupboards, and door tracks and make your way down towards tabletops, baseboards, and floors. You can also hire professionals for budget end of lease cleaning Melbourne to get your entire rental property spruced up in a well-organised manner before the final inspection.

Clean Your Air Vents & Filters

Believe it or not! Air vents, filters and grates tend to accumulate a lot of dust specks that can cause indoor air pollution. So, wipe down the vent’s outer part using a damp microfiber cloth. If you want to clean it deep, use a vacuum machine with a HEPA filter and clean interior parts like a pro. When it comes to air filters, replace them post-renovation if required. This can make a huge difference in reducing pollen, allergens and construction waste from rooms. This can help you get rid of dust mites with ease, especially if you are suffering from allergies.

Wash Your Windows

Do not forget your dust-laden windows after renovating your rental property in Melbourne, Victoria. Remove dust from blinds; wash your curtains before tackling dust and debris from window sills, panes and frames.  Overlooking dirty windows can affect the air quality in your home, leading to various health hazards. Make sure you vacuum the tight spaces, such as window sills and tracks to get rid of accumulated dust. After that, dry dust the window glass and panes. To remove stubborn stains:
  • Spray white vinegar, dishwashing liquid soap and warm water solution on the dirty surface.
  • Use a sponge or a non-abrasive tool to gently scrub the surface
  • Get into the sills using an old toothbrush
  • Run a rubber squeegee over your windows inside and out if possible, to get rid of excess solution.
  • Dry the surface with a clean microfiber cloth and achieve streak-free windows before the final rental inspection.

Remove Stubborn Stains From Hard Surfaces

Whether it is a tough paint stain or glue residue, make sure you have a natural cleaning product to maintain a healthy and hygienic indoor environment. Here is a quick guide to eliminating different types of stains:
  • Latex Paint: Apply vinegar solution and wipe down with a sponge or wet cloth to get rid of fresh paint. For dried one, scrape it off using a butter knife and apply rubbing alcohol for better results.
  • Caulk Stains: Start by scrapping off excess caulk using a knife. After that, apply lemon juice or citrus oil and let it sit for 10 minutes until to gently scrub it.
  • Glue Residue: Use a solution of warm, soapy water, vinegar and lemon juice to get rid of glue stains. Rub the surface gently. Do not use vinegar on natural stone surfaces. For that, you can use baking soda and warm water.
Professional end of lease cleaners Melbourne also uses tried and tested products to tackle stubborn stains and grime when preparing rental properties at the end of a tenancy. Here is a complete end of lease cleaning checklist for furnished vs. unfurnished rentals to help you make a well informed decision.

Pay Attention to Tricky Areas

When sprucing up you rental property post-renovation, be sure you focus on the tricky areas  or nooks and crannies, such as:
  • TV panels
  • Electronics
  • Kitchen appliances
  • Lampshades
  • Stovetops
  • Bathroom tile grouts
  • Lighting fixtures, etc

Vacuum Upholstery and Carpets

Though it is always good to cover your furnishings during the renovation process, you should vacuum-clean them to get rid of dust particles and grime. This is because carpet fibres and upholstery fabric tend to embed a lot of dust and debris – polluting indoor air quality. So, use a heavy-duty vacuum machine with a HEPA- filter and clean like a pro. For carpet stains, you can blot the surface with a damp cloth after applying a vinegar solution. Do it gently and sprinkle baking soda to get rid of unpleasant odours. However, you need  proper methods to clean different types of upholstery fabrics without causing any damage. If you want to impress your landlord during the inspection, hire a company that specialises in budget end of lease cleaning Melbourne. They can help you retrieve bond money without getting into any dispute.

Wrapping Up

These cleaning tips can help you prepare a rental property after renovation without a hint of stress. Make sure you tackle the accumulated dust from almost all surfaces, use a HEPA-filtered vacuum machine for soft furnishings and vents, wash windows, sweep floors and clean nooks and crannies to get your bond back with ease.