How to Clean Toilet Bowl Stains Effectively? 

Did you know that an average toilet bowl contains about 3.2 million germs per square inch? Therefore, it is necessary to clean and maintain your toilet bowl to prevent the buildup of germs and bacteria and keep you and your family safe. But you must also maintain your toilet bowl regularly to eliminate yellow, brown or red stains that build up over time. These stains are caused due to several factors, including hard water, iron content, mould and copper pipes, and each needs effective solutions. Your end of lease cleaners Melbourne can help deep clean your toilet bowl and remove these stains in no time, but if you want to do this on your own, it is better first to find the cause of your stain and then set out to clean them. You should use the steps below to help determine your stains and then use natural solutions to scrub and clean them.

Stains You Can Find In Your Toilet Bowl

To clean your toilet bowl properly, end of lease cleaners in Melbourne recommend that you should first determine the kind of stain. Once you identify the stain, you can then understand which cleaning solutions would be most effective on them. Here are some of the most common toilet bowl stains and their causes: 1. Remove Hard Water Stains One of the most common stains that you will find in your toilet bowl is hard water stains that are yellow or off-white. If your area has a high content of hard water, the minerals in this water, like calcium and magnesium, will slowly deposit and harden on your toilet bowl and cause stains. In Melbourne, the level of calcium in the water supply ranges from 10 to 26 ppm. Therefore, it is necessary to clean these stains before these deposits clog your toilet jets and holes and cause a problem in your pipes. You might also find these hard water stains on your bathtub so use these tips to clean tough stains from your bathtub. 2. Get Rid Of Copper Stains If you find blue stains on your toilet bowl, it could be due to acid in your water or to corrosion of your pipes. You can use natural solutions to clean these stains, but if the problem persists, it is better to let a professional plumber check your pipes. 3. Eliminate Rust Stains If you find red or brown stains on your white porcelain toilets, it could be due to the presence of rust. Rust occurs when the iron in water reacts with oxygen and creates a reddish-brown residue. This is highly corrosive and can damage your pipes, so you must clean these stains as soon as you spot them. 4. Prevent Mould Stains Mould is one of the most common stains in your toilet bowl as these organisms like damp and moist areas. If you smell a musty odour or notice black or dark green spots on your toilet bowl, these are mould stains, and you must clean them effectively. It is also a good idea to ventilate your bathroom regularly after you remove the mould stains to prevent the buildup of moisture and dampness. 5. Scrub Away Pink Stains Lastly, if you spot pink stains on your toilet bowl, this results from the bacteria Serratia marcescens. These bacteria feed on phosphates, moisture and dust particles and harm your health and indoor air quality. Using the above list, you should identify your stains and start cleaning them with effective natural solutions. However, if the problem persists after you are regularly cleaning and maintaining your toilet, then it could be a sign of a bigger issue. In such cases, it is better to either install a filter to drain all chemicals and minerals from your water or hire a plumber to check your pipes.

Tools To Clean Your Toilet

Here is a list of the tools end of lease cleaning services in Melbourne recommend you will need to clean and scrub your toilet bowl and make it sparkle:

Rubber gloves

Face mask

Toilet brush

Baking soda

White vinegar

Hydrogen peroxide

Borax

Lemon

It is important that you know which of these cleaning products you must never mix with each other and other cleaning solutions. You can now use these cleaning tools and solutions in the following ways to remove stains:

Methods To Remove Stains From Your Toilet Bowl

1. Lemon Juice And Water The citric acid in lemon juice dissolves calcium and mineral deposits and removes fungi like mould. Thus, you should use lemon juice to remove hard water and mould stains from your toilet in the following ways:

Mix ½ cup of water and one cup of lemon juice in a spray bottle.

Next, flush your toilet and close the water valve to stop the water supply so you can clean the stains properly.

Now, you must spray the lemon juice all over your toilet stains, including around the rim.

Leave this solution for 20-30 minutes and scrub the juice to ensure it covers all the stains.

Next, flush the toilet and watch the stains disappear.

2. Vinegar And Baking Soda If the above solution does not work, end of lease cleaners in Melbourne recommend using powerful natural cleaners, white vinegar and baking soda. White vinegar contains acetic acid with a pH of 2.5 that charges the particles and makes them attracted to the water so that it is easy to remove. Baking soda, on the other hand, is a very powerful deodoriser and whitener. You can use these solutions on their own to clean your stains, but they are more powerful when you combine them in the following ways:

Turn off the water supply and flush the toilet to clean the stains properly.

Now, take half a cup of baking soda, sprinkle it on your stains, and leave it for 10 minutes.

Next, pour two cups of distilled white vinegar on these stains and scrub the paste with a brush.

The baking soda and vinegar will combine to form a fizzing foam that will lift and remove stains easily.

After 30 minutes, scrub these stains off with a toilet brush and flush the toilet.

You can read more about the cleaning benefits of using white vinegar to know more about this effective cleaning agent. 3. Borax And Vinegar Paste One of the most effective ways to get rid of stubborn hard water and mould stains is to use a paste of borax and vinegar. Mix two tablespoons of white vinegar with 1⁄2 cup baking soda and spread this on your stains. Scrub the paste onto the stains and leave the solution for twenty minutes. The abrasive cleaning crystals of borax and the acetic acid of vinegar will remove stains in no time. 4. Hydrogen Peroxide Solution Lastly, if you have tough stains that refuse to come off with the above methods, you should use hydrogen peroxide. Hydrogen peroxide has no harmful chemicals and is a natural whitener and disinfectant that destroys germs and bacteria. To clean your toilet stains with hydrogen peroxide:

Pour ½ a cup of this solution into your toilet bowl and scrub the area.

Leave this for 30 minutes, then sprinkle baking soda over the solution.

After 10 minutes, scrub the area again and flush your stains.

You can also use the following steps to disinfect your home and keep it free from germs.

Additional Tips

You can also use Coca-Cola to clean your stains by leaving them in your toilet bowl overnight.

Do not use abrasive cleaning tools that can damage your toilet bowl.

It is a good idea to let the end of lease cleaners in Melbourne deep clean your toilet every six months so that you can maintain your toilets.

You should sprinkle baking soda or vinegar twice a week to prevent the buildup of stains and to keep your toilets clean.

Conclusion

Using the above natural solutions, you can easily maintain a white and shining toilet bowl that is free of germs as well. It is a good idea to clean your toilet at least twice a week so that you do not have to scrub away tough stains. You must also check your pipes regularly and install a water filter to prevent the buildup of minerals and acids in your toilet bowl.