Important Spots To Look For When Cleaning A Rental Property

Preparing the rental property for the final inspection shouldn’t be as overwhelming as tenants/renters think. Stories of rental disputes at the end of the tenancy are the primary cause of stress. During a rental inspection, your landlord or property manager will examine the rooms, windows, doors, walls, appliances and outdoor areas of the premises. If you have maintained it well, you can easily get the full bond amount. However, most tenants lose their hard-earned deposited security due to dirty floors and stained walls and surfaces. If the rental home is dirty or messy, consider hiring trained professionals for a meticulous end of lease cleaning in Melbourne. Whether it is stubborn stains on bathroom walls or accumulated dust on light fixtures and fittings, they can complete their jobs with perfection and give you high-quality cleaning results. However, most tenants prefer cleaning a property on their own to save money. If you are also doing the same, clean the following important areas or spots because landlords closely inspect them before returning the bond money. Let’s get started!

1. Ceiling Fans

These are the most overlooked spots when performing bond cleaning at the end of a tenancy. Here are some tips for cleaning ceiling fan without creating any mess:

• Place a ladder or step stool underneath the fan.
• Slip an old pillowcase over one of the blades and remove dust and grime.
• Repeat the process with other blades
• Spray the solution on a clean microfiber cloth and wipe off the fan blades
• Clean the fan’s motor and pull chain.

Note: Use the white vinegar, dishwashing soap and warm water solution as a stain remover.

2. Stained Walls

Stains on the walls of your rental apartment could be the reason for a dispute between you and a landlord. Make sure you inspect the walls of all our rooms. Make sure you remove scuff marks or stains from your painted walls using proper products. You can spot clean your walls using warm water and mild dishwashing detergent soap. Apply the solution to the rag or sponge and rub at the stained surface with your gentle hands. If the stain persists, you can also use a magic eraser. It works wonders in removing tough stains and grime from almost all surfaces. Make sure you clean 8 things in the living room that are germ laden. For sparkling results, hire professional end of lease cleaners in Melbourne and transform your entire rental premises.

3. Windows

Cleaning windows is one of the back-breaking tasks, especially if they are filthy. Have a look at quick tips on cleaning dirty windows, sills and frames:

• Remove accumulated dust and loose debris from window glass using a clean microfiber cloth.
• Vacuum the window sills, tracks and frames
• Spray the white vinegar and warm soapy solution on the surface
• You can either wipe the windows using a lint-free towel in Z-shaped motion, or
• Run a squeegee to remove excess soap and water
• Use an old toothbrush to remove grime and grease from window sills and frames
• Clean the windows inside and out if accessible
• Dry windows completely to avoid streaks behind.

Note: Clean windows on a cloudy day to avoid unpleasant streaks.

4. Window Blinds

It is easy to forget window blinds when preparing the rental property at the end of a lease. Unfortunately, window blinds collect dust mites, allergens, pollen and dirt that can cause various health problems. You can wipe down each blind using a microfiber cloth. Vacuuming is also one of  the best ways to fetch dust and debris. You can also tie a cloth on a tong and secure it with a band. Wipe each blind and get rid of dust and grime. Spray the all-purpose cleaning solution on the stained surface and wipe it using a cloth. You can also hire professionals for a thorough end of lease cleaning service in Melbourne for better results.

5. Oven/ Microwave

Use eco-friendly products to remove stuck food particles, grime, grease and stubborn stains from your oven and microwave. Use a microwave-safe boil and fill two cups of water and two tablespoons of white vinegar. Add a 1 tablespoon of lemon juice and run the appliance for 2 minutes. Switch off the appliance and let the steam break down stains and grease. Now, use a damp cloth and wipe down the interiors and walls of your kitchen appliances. If you have an oven, remove racks and soak them in hot soapy water. Applying baking soda paste inside the oven can also help you achieve sparkling results. You can also buy angry mama or other cleaning products on Amazon under $15 for quick and effective results.

6. Stove Top

You can clean glass-topped electric stoves using white vinegar solution. It can help you get rid of grease, oil splatters, and spills. For better outcomes, sprinkle a generous amount of baking soda, and leave it for a few minutes. Wipe the surface, including the knobs and other areas, using a lint-free towel. Buff dry the surface for a spotless shine.

7. Bathroom Tiles

You can spray white vinegar and castle soap solution on bathroom tiles to remove hard water stains and grime. Leave the solution for 10 minutes before scrubbing it off using an old toothbrush or a sponge.

8. Carpet

Do not forget to vacuum clean your carpet if it looks dull and discoloured. This can help you remove dust, debris and other grime with ease. You can also hire carpet cleaners in Melbourne for steam cleaning if you witness mould, mildew and stubborn stains on your flooring.

Conclusion

These are some of the important areas to look for while sprucing up your rental property. Paying special attention to the dirty spots can help you pass the property inspection and get the bond back with ease. You can also hire professionals for a thorough end of lease cleaning in Melbourne for a stress-free experience.