However, you need to keep it perfectly clean because dust, dirt, stains and spills are easily visible on the tiles and grout. As a result, it looks dull, which ultimately diminish the overall beauty of your house.
You might be sweeping and mopping your tile floors as a part of regular household dusting, but that doesn’t mean it is properly clean. To remove the stubborn dirt from the tiles and grout, follow the right procedure and make sure they sparkle.
If you want to clean the tiles and grout at the end of tenancy, avoid DIY methods. Instead, hire seasoned professionals to get the best end of lease cleaning in Melbourne. They use advanced tools and the latest methods to clean every nook and corner of the property. However, if you want to clean such spots on your own, you will need some experts' guidance.
Read on to know more about the tile and grout cleaning procedures used by professionals.
How to Clean Tiles
Over time, your kitchen and bathroom tiles can accumulate a lot of dirt, food stains, greasy marks, and other similar stuff. The presence of water on bathroom tiles can also promote the growth of the mildew. If you want to clean your tiles perfectly, follow the cleaning procedure mentioned below.
Removing Stubborn Dirt
The first thing you need to do is to wipe the tile with a microfibre duster so that you can remove all the dust present on the surface. If you need to clean the floor, use a broom.
Then prepare a solution in a bucket using white vinegar (¼ cup), liquid dish soap (1 tablespoon), baking soda (¼ cup), and hot water (2 gallons). Dip your mop into the solution and wring it properly to remove the excess water. Then push the mop back and forth to clean the entire area and apply more pressure to remove the stubborn dirt.
Removing Greasy Marks
Greasy marks are common on kitchen tiles and easier to remove when they are fresh. So, if you notice oil splashing on the tiles when you are cooking, react immediately. The first thing you need to do is to blot the oil with a paper towel. Then fill a bucket with warm water and add a few drops of dishwashing liquid in the bucket.
It will help to break down the grease and removes the stains easily. Soak a sponge into the solution and wring it properly. Then place it over the stain and wipe the spot before washing the sponge into the solution. Repeat the process until the strain removes completely.
How to Clean Grout
The grout is one of the hidden spots that often get overlooked during the cleaning of tiles. Even after wiping or mopping the tiles, the grout still looks messy. It is because the basic sweeping and mopping cannot remove the stubborn dirt from the grout. You need to make a little extra effort to get the result you want.
If you want to save your time or clean the grout perfectly during the end of tenancy, hire a company that offers a thorough end of lease cleaning in Melbourne. To carry out the task on your own, here is the procedure that experts usually follow.
Use Baking Soda and Vinegar
The combination of baking soda and vinegar can be very effective to remove the dirt from the grout. First, prepare a thick paste using 3 parts of baking soda and 1 part of water. Use an old toothbrush to apply the paste on the grout line and leave it for a few minutes.
Then pour vinegar and water into a spray bottle and shake it well. Apply the vinegar-water solution on the grout lines and again wait until the solution stops bubbling. Use the toothbrush to scrub the grout properly. Finally, mop the surface with clean water and make sure there is no dirt or baking soda residue. If the tiles made of natural stone, then avoid using vinegar or anything acidic substance.
Use Hydrogen Peroxide, Dish Soap and Baking Soda
If you do not have vinegar or the surface is not suitable for it, you can use hydrogen peroxide and baking soda. Take a bowl and mix hydrogen peroxide (¼ cup), dish soap (1 tablespoon) and baking soda (¾ cup) in it.
Then use an old toothbrush to apply the paste on the grout line and wait for a few minutes. Then properly scrub the spot using the same brush and leave it for a couple of minutes more. Pour a small amount of water directly on the grout to remove the dirt and residue. At last, buff the spot with a clean, dry cloth.
Removing stubborn dirt from tiles and grout doesn't have to be a stressful task. All you need to do is to follow the right methods and products.
So, the next time to plan to clean the tiles in your home, particularly kitchen and bathroom, follow the procedure mentioned above. If you want to clean the area professionally, hire experienced end of lease cleaners in Melbourne. They will complete the task smoothly and perfectly.