Preparing a rental property for the final inspection is a painstaking task. You need to perform a thorough end of lease cleaning as it can decide the fate of your bond money.
According to the survey, most tenants lose their deposited security due to half-baked cleaning. If you are also concerned about your hard-earned deposit, then return the premises in its original condition. For that, you need to spruce up every nook and cranny of your rental unit. Most people clean only the large surfaces and visible dust- which is an incomplete practice.
A landlord thoroughly inspects the property, particularly the areas that you probably missed or overlooked. Whether it is out of sight or out of mind, make sure you pay attention to these hard-to-reach areas or spots before the rental inspection.
That’s the reason why most tenants hire professionals for a
detailed end of lease cleaning in Melbourne. They bring a cleaning checklist approved by professionals which includes all the important spots of a rental property.
So, here is the list of 8 hard-to-reach areas that should be cleaned at the end of your tenancy. Discover the best ways to clean these surfaces like a pro.
1. Ceiling Fans
Most people forget to remove accumulated dust, grime from their ceiling fans while sprucing up a house. Since your ceiling fan collects a lot of dirt and pollens on a regular basis, make sure you clean it using the right tools.
Use a disposable duster with an extendable handle to fetch the tiny dust particles and other loose debris from the blades of your fan. It is good to choose a microfiber duster rather than a feather one as it can scatter the dust around when you wipe the blades.
There is another cleaning hack for you. However, you need to arrange a ladder, an old pillowcase and a microfiber cloth. Use a pillowcase to remove accumulated dust from your fan blades. This won’t let the dust particles fall onto your head, upholstery furniture and floors.
2. Tall Furniture and Cabinet Tops
Do not forget to clean the top of your cabinets, wardrobe and shelves while preparing your rental property for the final inspection. These areas must be laden with dust and grime.
You can use the same disposable duster with an extendable handle to reach the height of cabinet and wardrobe tops. To
get rid of tough stains, you can use a step stool and wipe the surface with a microfiber cloth damped in white vinegar and dishwashing solution. Wipe the surface and rinse it with plain water.
3. Sliding Doors and Shower Door Tracks
These tight spaces have the potential to collect dust specks, dirt and grime because you don’t clean them on a regular basis. However, you should wipe down these areas before moving out of the property. First, remove screens and give them a deep clean. You can use a crevice tool or an old toothbrush to get into the tight areas of sliding doors and shower door tracks.
After removing loose dust, mix a solution of dishwashing liquid, white vinegar and warm water in an empty spray bottle. Spray the solution on the surface and use an old brush to scrub off the stains. Removing soap scum from shower door tracks using this trick is fantastic.
4. Garbage Disposal
A clogged garbage disposal can be the breeding ground for harmful germs and bacteria. You need to keep it clean and unclog using the right products. First, run the disposal with a full stream of cool water. Let the water run for 10 seconds after removing all the debris. Grind some lemon peels with water or add ice cubes with baking soda. Run the normal water to clean the garbage disposal.
5. Behind the Toilet
Unluckily, the surface behind the toilet seat is difficult to clean since most mops won’t fit the tight space. All you need to do is to use a stiff brush and get rid of loose dust, soil and hair.
The tool of your vacuum cleaner works wonders in sucking the dust. Do not forget to disinfect the area using warm water and white vinegar. Wipe down the surface and rinse with plain water and dry it with a cloth.
If you want sparkling results, then hire professionally-trained end of lease cleaners in Melbourne to help you
get the bond back without any conflict.
6. Window Blinds
Get rid of dust, grime and allergens from window blinds before the final inspection. You can clean both sides of blinds by wrapping microfiber cloths around each of your kitchen tongs. Secure it with a rubber band and wipe off your blind.
7. Air Vents or Filters
If your HVAC air vent or filter is layered with dust and dirt, then pull up your socks and get into the cleaning process. First, take the covers off and remove the grime with a water hose. You can also soak it in hot soapy water to get rid of grease.
Vacuuming vent is also a great hack to keep it clean on a frequent basis. This will also ensure quality air inside your house in Melbourne.
8. Showerhead
The cleaning hack is super easy. All you need to do is to mix 1 cup of vinegar with 2 cups of warm water. Fill the plastic bag with mixture and wrap it around the showerhead. Secure it with a thread or rubber band and leave it for 2-3 hours. Remove the bag and scrub off the showerhead with baking soda.
Conclusion
These are 8 hard-to-reach areas that need to be cleaned
before the rental inspection. You can also hire a reliable company, which specialises in a thorough end of lease cleaning in Melbourne and secure your bond money.
