Since carpets often witness drink spills, food splatters, dust, grime, pet urine and other stains, make sure you clean them thoroughly using the right methods. You should pay attention to your soiled carpet and save it from damage and discolouration if you are at the end of your tenancy.
If you are moving out of your rented apartment, then it is an ideal decision to hire experts who can carry out the best end of lease cleaning in Melbourne according to REIVIC-approved checklist.
However, if you are planning to do it on your own, make sure you follow the best ways that can deep clean your delicate floor coverings without causing any damage. Here are some unorthodox ways to remove embedded dust, grime, spills, stubborn stains and mould from a carpet.
Let’s Get Started!
1. Use a Lint Roller
A vacuum machine is excellent but not good enough to clean pet hairs and tiny dust particles from your carpet. This is one of the most common problems with vacuuming.
There is no denying the fact that vacuum cleaning can help you get rid of food crumbs, dust, debris, and other loose contaminants from your floor coverings. But, it cannot remove embedded dirt and hair from the fibres to a higher standard.
Well, you can use a lint roller for areas where dust and dirt embedded deep inside the fibres of your carpet. You need to put some efforts until you grab all the dust particles. Do not spend more than five minutes while running lint roller on your carpet. It is one of the unorthodox ways to clean dirty carpets.
2. Remove Pet Hair using a Squeegee
Believe it or not! Removing pet hair from carpets with a vacuum cleaner seems to be the most back-breaking chores. If lint rollers are not as useful as you think, then you can use a squeegee which is commonly used to clean dirty window glasses and mirrors.
It can work wonders in collecting pet hairs and dead skin from your carpet’s fibres. All you need to do is to water the squeegee and run it on your dirty carpet. This will give you great results and make your carpet look sparkling clean again.
If you want to pass your inspection at the end of your tenancy, consider availing professional carpet cleaning service along with the end of lease cleaning in Melbourne to impress your fussy landlord.
3. Try an Iron Method for Tough Stains
This is one of the most unconventional tricks when it comes to removing stubborn carpet stains. If you follow this hack properly, you will get your carpet back in a pristine condition without even causing any damage.
First, apply water and vinegar solution on the carpet stain and let the liquid soak deep into the fibres of your carpet. Put a clean cloth or towel on the affected area and place the iron on top of it. The heat will breakdown the stain and transfers it from your carpet to the clean microfiber cloth.
You must try this trick if you want to drive tough stains out of your plush carpet.
4. Apply Hydrogen Peroxide
You don’t need to buy expensive conventional carpet cleaners because they contain hazardous chemicals that can harm the environment when released into the air and water. Instead, you can prepare a natural cleaning solution to treat tough stains.
Mix ¾ cup hydrogen peroxide, a ¼ cup white vinegar, one gallon of warm water, 2 tablespoons of liquid dish soap and fabric softener together. You can load in your shampooing machine and use it to deep clean your grimy carpets.
5. Use Ice Cubes
Rearranging furniture can help you give a new look to your entire abode. However, moving heavy furniture or sofa from one place to another can leave visible dents on your floor coverings. The trick we are sharing below to remove nasty marks is quite simple.
Take a few ice cubes directly from your freezer and put them on the affected area. Let them melt properly before blotting out the excess water. This will fade away the dent marks and return your carpet to its original glory.
6. Apply Baking Soda to Remove Oil Stains
Eliminating oil from a light coloured carpet is one of the most difficult tasks. If you don’t want to damage the fibres of your carpet while removing oil stains, then try this unorthodox trick and say goodbye to greasy oil stains.
Sprinkle a pinch of baking soda on the affected area and let it sit until the baking soda breaks down the stain.
Now, vacuum your carpets to get rid of baking soda residues and you will see a much lighter stain. After that, dab the area with a clean cloth dipped in vinegar and warm water solution.
You can also hire professionals for steam cleaning in Melbourne if your carpets have mould and mildew. They will transform a dirty and greasy carpet into a pristine condition in no time.
These are some unconventional tricks that you can try to clean your carpets and save from damage. All you need is a proper technique which is already mentioned in this article. If you need a thorough end of lease cleaning in Melbourne, you can search and opt for the best company near you that can give you the highest standard of service at the best price.