Your Complete Post Renovation Cleaning Checklist

Finally, you have accomplished the home relocation project within the desired budget. Renovating an old kitchen or adding new and stylish cabinets in the bathroom can elevate the overall property values. It can even help landlords find potential occupants or tenants in the competitive residential rental market in Victoria.

If you want to present your home in its best condition, ensure you conduct a thorough post-renovation clean-up session. After weeks or months of construction work, the property can get covered in dirt, dust, construction waste, and other debris. This can pose a serious health threat, including breathing problems, allergies, and skin irritation.

So, here is a complete post-renovation cleaning checklist to streamline the complicated process. This guide includes every nook and cranny, including exterior areas, walls, ceilings, bathroom fixtures, etc., for sparkling outcomes.

1. Prep the Area by Removing Construction Residue

It is always good to remove construction debris and injury-prone residue from surfaces. For that, you will need to thoroughly inspect the entire house inside and outside. Gather the construction waste, such as loose bolts, wooden blocks, staples, screws, etc, from the floors, countertops and furniture pieces, if any.

2. Remove Dust From Ceiling Walls and Light Fixtures

According to end of lease cleaning Melbourne experts, dusting and vacuuming come first when tackling construction dust and debris. Use a telescopic microfiber duster or cloth to remove dirt and debris from the ceiling walls, nooks and crannies. Use an old pillowcase to remove dust from ceiling fans and blades. You can also use a HEPA-filtered vacuum machine with a soft-bristled brush for dust removal. Make your way down to the light fixtures, fittings, and shelves.

Tip: Don’t forget to vacuum and dust mouldings, frames, and curtains to ensure a clean indoor environment.

3. Thoroughly Clean Your Windows and Blinds

Windows are one of the most overlooked areas when cleaning a house after renovation. The glass surfaces, frames, sills, and other parts are often covered with construction dust, paint drips, and other grime, ruining the overall look and feel of a house and causing indoor air pollution.

Use a vacuum cleaner with a brush attachment to remove dust from nooks, crannies, and window blinds. Then, spray a white vinegar solution on the surface and leave it for a few minutes. Gently scrub the surface with a sponge or a damp cloth. Clean inside and outside for sparkling results. Use a rubber squeegee from top to bottom to achieve a spotless shine. This will automatically boost your property’s value and helps to get higher selling value or rental income.

Tip: Clean the windowsills to remove accumulated dust and gunk. Wipe down with a damp cloth and retrieve a tidy look.

4. Vacuum Your Carpets and Upholstery Furniture

Next on the cleaning checklist are plush carpets and upholstery furniture. They tend to accumulate loose construction debris and particles that pollute indoor air quality. Thus, it becomes imperative to deep clean your carpets using a heavy-duty vacuum cleaner. Attach the most suitable brush attachment and attack on nooks and crannies to fetch embedded dirt and grime.

Do the same with your upholstered furniture. Gently vacuum small sections of your couch and remove collected dust and harmful allergens.

5. Eliminate Paint and Plaster Stains From Surfaces

Removing paint stains, plaster remnants, and other construction grime from different surfaces requires precision. Avoid using abrasive or chemically laden products. Professionally trained cleaners often use non VOCs products for a budget end of lease cleaning Melbourne. So, here are some best ways to tackle the toughest stains while promoting healthy indoor environments.

• Vinegar Solution For Plaster Residue: Prepare a solution of white vinegar, dishwashing detergent, and warm water. Spray the solution onto stained surfaces, such as floors, tiles, appliances, etc., and gently scrub with a soft-bristled brush or a sponge.
• Baking Soda for Marble, Granite, and Limestone Surfaces: Sprinkle a generous amount of baking soda or prepare a thick paste to remove paint stains from natural stone surfaces. Wipe and rinse the surface.
• Magic Eraser for Walls and Furniture: Wet a magic eraser and gently scrub the paint and plaster from your painted walls and wooden furniture. Use it to clean your kitchen appliances and chrome fixtures. 

6. Kitchen Cleaning Checklist

There is no denying that kitchens can be complicated areas of any home. Whether you have partially renovated your kitchen or installed new cabinets and shelves, make sure you deep clean it to prevent dust buildup and gunk. Here is a complete post-renovation kitchen cleaning checklist:

• Clean shelves and counters inside and outside
• Remove stains and gunk from kitchen appliances
• Wipe down cabinet hardware
• Wash and polish sink and faucets
• Remove trash
• Wipe down your countertops
• Sweep and mop the floors

7. Pay Special Attention to Your Bathroom(s)

Bathroom surfaces also need attention-to-detail cleaning post-renovation. So, here are some of the important tasks to carry out:

• Clean sink, shower head and bathtub
• Remove dirt and stains from your toilet
• Clean and polish mirrors
• Remove dust from cabinets and counters
• Clean windows, baseboards and doorknobs
• Remove stains and gunk from grout lines using an old toothbrush, etc

8. Clean the HVAC System to Promote Healthy Indoor Air

Do not forget the HVAC system because the accumulated construction dust stuck in the vents can pollute the indoor environment, posing health hazards. So, it is good to vacuum air vents or change the filters before the arrival of a new tenant. Proper maintenance can prevent bathroom condensation as well.

9. Clean the Exterior Area

In the last step, remove dirt and grime from your exterior surfaces, which often collect dust and debris during construction projects. You can use pressure washing to remove paint residue and stubborn gunk from driveways, patio areas, and decks.

Experts also follow the pre-approved checklist for an expert end of lease cleaning Melbourne to achieve desired results. So, follow all tasks and maintain a clean and shiny abode after the renovation project.

How to Conduct a Post-Renovation Cleaning Session?

Wrapping Up

Follow this complete checklist and remove construction dust, paint spills, stubborn stains, and gunk after renovation. This can help boost the property's value in the real estate market.